Siemens HiPath 500 Operating Manual Download

Page: 48 / 106

Step-by-Step

Conducting calls – enhanced functions

Activating the phone number display

Press the Talk key.

Call the system menu.

> <

[

Select and confirm the menu item.

Press the On-hook key to end the process.

Directed call transfer

You can transfer calls to other telephones to your hand-
set. This is also possible when you are conducting a call.

This function can also be called by entering the code
(

page 88).

Another telephone rings.

Press the Talk key.

Call the system menu.

> <

[

Select and confirm the menu item.

> <

[

Select and confirm the menu item. The called user is
displayed.

Call the additional menu.

either:

> <

[

Select and confirm the menu item.

or:

> <

[

Select and confirm the menu item.

continue:

Conduct the call.

Menu

Restore caller ID?

Call ID restored

Menu

Service?

*59=Pickup - direct-

ed?

Mnu

Accept call?

Note:

If several users are called simultaneously, only
the first user called is displayed. However, you
can transfer by entering the phone number of
any of the users called.

Select
extension?

Summary of Contents for HiPath 500











































































































Search results

Summary of Contents for HiPath 500

Reviews:

Related manuals for HiPath 500

Brands by name

Popular brands

Siemens HiPath 500, Operating Manual

Search results

Summary of Contents for HiPath 500

Reviews:

Related manuals for HiPath 500

Brands by name

Popular brands