Siemens HiPath 500 Operating Manual Download

Page: 93 / 106

Telephone blocking

Step-by-Step

Telephone lock code programming

You can protect your handset against unauthorised ac-
cess (thereby safeguarding personal data) by entering a
5-digit code to lock and unlock it.

To change a code, first enter the old code and then key
in the new code twice.

Press the Talk key.

Call the system menu.

> <

[

Select and confirm the menu item.

> <

[

Select and confirm the menu item.

Enter the old PIN (5 digits, default "00000").

Enter the new PIN, e.g. 11111 (5 digits).

Repeat the new PIN.

Press the On-hook key to end the process.

Menu

Service?

*Change PIN?

Note:

If you have forgotten your PIN, contact your
service engineer for help. He will be able to re-
set your PIN to "00000".
It is also possible to open your mobile phone
from a central station, e.g. from the attendant
terminal.

Summary of Contents for HiPath 500











































































































Search results

Summary of Contents for HiPath 500

Reviews:

Related manuals for HiPath 500

Brands by name

Popular brands

Siemens HiPath 500, Operating Manual

Search results

Summary of Contents for HiPath 500

Reviews:

Related manuals for HiPath 500

Brands by name

Popular brands