Siemens HiPath 500 Operating Manual Download

Page: 76 / 106

Step-by-Step

Group functions

Activating/deactivating group calls

Press the Talk key.

Call the system menu.

> <

[

Select and confirm the menu item.

> <

[

Select and confirm the menu item.

either:

> <

[

Select and confirm the menu item.

or:

> <

[

Select and confirm the menu item.

continue:

Press the On-hook key to end the process.

Forwarding a Mulap line

You can immediately forward internal and/or external
calls to your lines to different internal or external tele-
phones (destinations) (external destinations are also
possible if the system is configured accordingly).

If you activate call forwarding for a line, this shall apply
to all line keys of your group for this line.

Forwarding on

Press the Talk key.

Call the system menu.

> <

[

Select and confirm the menu item.

> <

[

Select and confirm the menu item.

> <

[

Select and confirm the menu item.

Enter a line number.

either:

> <

[

Select and confirm the menu item.

Menu

Service?

More features?

#85=Leave hunt
group?

*85=Join hunt
group?

Menu

Service?

More features?

*501=Forward Line:
ON?

1=all calls?

Summary of Contents for HiPath 500











































































































Search results

Summary of Contents for HiPath 500

Reviews:

Related manuals for HiPath 500

Brands by name

Popular brands

Siemens HiPath 500, Operating Manual

Search results

Summary of Contents for HiPath 500

Reviews:

Related manuals for HiPath 500

Brands by name

Popular brands