Siemens HiPath 500 Operating Manual Download

Page: 35 / 106

Conducting calls – enhanced functions

Step-by-Step

Conducting calls – enhanced
functions

Speakerphone mode

Features

Speakerphone mode offers you the following advantag-
es:
•

Other persons can listen to and participate in the
call.

•

Your hands are free.

•

When dialling, you can hear the ring tone, for exam-
ple, without having to lift the handset to your ear.

Speakerphone mode can be used effectively up to a
background noise level of 50 dB (A).

Activating speakerphone mode

Speakerphone mode can be activated during a call,
when dialling or when answering a call:

Press the Speakerphone key.

Setting the volume

The volume can be set during a call:

Press the Speakerphone key once more.

Within three seconds: Press the left or right side of the
control key to reduce or increase the volume.

Within three seconds, as necessary: Save the volume
set.

Save

Summary of Contents for HiPath 500











































































































Search results

Summary of Contents for HiPath 500

Reviews:

Related manuals for HiPath 500

Brands by name

Popular brands

Siemens HiPath 500, Operating Manual

Search results

Summary of Contents for HiPath 500

Reviews:

Related manuals for HiPath 500

Brands by name

Popular brands