Siemens HiPath 500 Operating Manual Download

Page: 82 / 106

Step-by-Step

Message functions

Check for a new voice-mail message

either:

Press the message key.

or:

Press the Talk key.

Call the system menu.

> <

[

Select and display menu item.

Follow the user guidance system from this point on-
wards.

Press the On-hook key to end the process.

Calling an old message

Old messages that have not been deleted cannot be
displayed using the message key

. To call these mes-

sages, proceed as follows:

Press the Talk key.

Call the system menu.

> <

[

Select and confirm the menu item.

Select the required message and call the additional
menu.

> <

[

Select and confirm menu item.

> <

Call the additional menu.

[

Select and confirm the menu item. The time of the
message is displayed.

> <

Call the additional menu.

either:

> <

[

Select and confirm the menu item. The sender is called
back.

Messages received

Menu

Display Messages?

Messages received

Menu

Display Messages?

Msg. from:
...

Mnu

Text?

<Text>

Mnu

Time/date sent?

at: ...

Mnu

Call Sender?

Summary of Contents for HiPath 500











































































































Search results

Summary of Contents for HiPath 500

Reviews:

Related manuals for HiPath 500

Brands by name

Popular brands

Siemens HiPath 500, Operating Manual

Search results

Summary of Contents for HiPath 500

Reviews:

Related manuals for HiPath 500

Brands by name

Popular brands