Siemens HiPath 500 Operating Manual Download

Page: 74 / 106

Step-by-Step

Group functions

> <

[

Select and confirm the menu item.

> <

[

Select and confirm the menu item.

Press the On-hook key to end the process.

Logging back on

Press the Talk key.

Call the system menu.

> <

[

Select and confirm the menu item.

> <

[

Select and confirm the menu item.

> <

[

Select and confirm the menu item.

Press the On-hook key to end the process.

UCD night service

UCD night service is a separate night service for call dis-
tribution. It is not affected by the system night service.

All incoming calls are forwarded to a special call distri-
bution destination.

Night destination on

Press the Talk key.

Call the system menu.

> <

[

Select and confirm the menu item.

> <

[

Select and confirm the menu item.

> <

[

Select and confirm the menu item.

Press the On-hook key to end the process.

UCD Menu?

*403=Work on?

Menu

Service?

UCD Menu?

#403=Work off?

Menu

Service?

UCD Menu?

*404=UCD night on?

Summary of Contents for HiPath 500











































































































Search results

Summary of Contents for HiPath 500

Reviews:

Related manuals for HiPath 500

Brands by name

Popular brands

Siemens HiPath 500, Operating Manual

Search results

Summary of Contents for HiPath 500

Reviews:

Related manuals for HiPath 500

Brands by name

Popular brands