8
Specifications
Technical data for heat detectors HI110 / HI112
54
Building Technologies
A6V10316298_e_en_--
Fire Safety
2014-05-21
8.3 Technical data for heat detectors HI110 / HI112
You will find information on approvals, CE marking, and the relevant EU directives
for this device (these devices) in the following document(s); see 'Applicable
documents' chapter:
l
Document A6V10301051
Detector line
Operating voltage
DC 16…28 V
Maximum current connection factor
1
Quiescent current at maximum current
connection factor
Max. 100
μ
A
Surge current at maximum current
connection factor
160
μ
A
Alarm voltage at:
l
Alarm current = 1…15 mA
DC 5…10 V
l
Alarm current = 35 mA
DC 18…22 V
l
Alarm current = 50 mA
DC 26…28 V
Alarm current at operating voltage
UB = DC 5…28 V
4…50 mA
Reset voltage UR:
l
Alarm is reliably reset
DC 0…2 V
l
Alarm may possibly not be reset
DC 2…4 V
Protocol
Collective (with and without current limitation)
Compatibility
See 'List of compatibility'
External alarm indicators
Number of external alarm indicators that
can be connected
Max. 2
Voltage
DC 9…30 V
Current
10…16 mA
Device characteristics for
HI110
Static response temperature with
parameter set:
l
'A1R' (typ.)
60 °C
Flashing interval times AI:
See chapter 'Internal alarm indicator'
Device characteristics for
HI112
Static response temperature with
parameter set:
l
'A2S' (typ.)
60 °C
l
'B' (typ.)
80 °C
Flashing interval times AI:
See chapter 'Internal alarm indicator'
Connections
Detector line and external alarm indicators:
l
Design
Screw terminal
l
Cable cross section
2 x 0.2…1.6 mm
2
