manualshive.com logo in svg

Siemens HI110, Technical Manual

Share
Download
Siemens HI110 Technical Manual Download Page 47

Mounting / Installation

5

Protective cages

47

Building Technologies

A6V10316298_e_en_--

Fire Safety

2014-05-21

5.11 Protective cages

Protective cage DBZ1194 protects the detector against mechanical damage.
EMC-protective cage FDBZ294 protects the detector against mechanical damage

and electromagnetic fields.

5.11.1 Installation of the protective cages

The protective cages can only be installed on the base attachment wet FDB295.

Installation of the protective cages

1 Base attachment

4 Flat plug 6.3 x 0.8 mm

2 Break out and screw protective cage on

firmly

5 EMC-protective cage

3 Protective cage

5.11.2 Grounding of the EMC-protective cage FDBZ294

The EMC-protective cage must be connected to the shielding of the detector line

cable at the flat plug.
If the detector line cable is not shielded then the EMC-protective cage must be

grounded using a separate cable.
For optimum grounding in the presence of powerful electromagnetic fields, the

ground line must be shorter than 10 m and have a cross section of at least

1.5 mm

2

.

Summary of Contents for HI110





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands