Siemens HI110 Technical Manual Download Page 5

Page: 5 / 60

About this document

Applicable documents

Building Technologies

A6V10316298_e_en_--

Fire Safety

2014-05-21

1 About this document

Goal and purpose

This document contains information on automatic fire detectors. Following the

instructions consistently will ensure that the product can be used safely and without

any problems.

Scope

The document is valid for the following automatic fire detectors:

OH110

OP110

HI110

HI112

Target groups

The information in this document is intended for the following target groups:

Target group

Activity

Qualification

Product Manager

Is responsible for information passing

between the manufacturer and regional

company.

Coordinates the flow of information

between the individual groups of people

involved in a project.

Has obtained suitable specialist training

for the function and for the products.

Has attended the training courses for

Product Managers.

Project Manager

Coordinates the deployment of all

persons and resources involved in the

project according to schedule.

Provides the information required to run

the project.

Has obtained suitable specialist training

for the function and for the products.

Has attended the training courses for

Project Managers.

Project engineer

Sets parameters for product depending

on specific national and/or customer

requirements.

Checks operability and approves the

product for commissioning at the place

of installation.

Is responsible for trouble-shooting.

Has obtained suitable specialist training

for the function and for the products.

Has attended the training courses for

Product Engineer.

Installation personnel

Assembles and installs the product

components at the place of installation.

Carries out a performance check

following installation.

Has received specialist training in the

area of building installation technology

or electrical installations.

Maintenance personnel

Carries out all maintenance work.

Checks that the products are in perfect

working order.

Searches for and corrects malfunctions.

Has obtained suitable specialist training

for the function and for the products.

Summary of Contents for HI110





























































Search results

Summary of Contents for HI110

Reviews:

Brands by name

Popular brands

Siemens HI110, Technical Manual

Search results

Summary of Contents for HI110

Reviews:

Brands by name

Popular brands