Siemens Gigaset SE365 WLAN Page 15 Operating Instructions Manual Download

Page: 15 / 97

First Steps

Gigaset SE365 WLAN / englisch / A31008-M1064-R101-1x-7619 / first_steps.fm / 19.09.2007

hablone 2

005_0

7_2

LED displays

The front panel of the Gigaset SE365 WLAN contains LED displays that show the oper-
ating state and simplify installation and fault finding in the network.
The LEDs show the following:

LED

State

Status

Repeater

On/Off

Shows the device’s current operating mode
(Repeater, Access point, Ethernet adapter). You can
change the operating mode via the

Mode

button on

the back panel.

On/Off

Adapter

On/Off

LAN

There is a connection to the local network via the
Ethernet cable.

Flashing

The Gigaset SE365 WLAN is sending or receiving
data via the Ethernet cable.

Off

There is no connection to the local network via the
Ethernet cable.

WLAN

In normal operation:

There is a wireless connection to the local network.

Flashing

The Gigaset SE365 WLAN is sending or receiving
data on its WLAN interface.

New firmware is being loaded on the Gigaset
SE365 WLAN or the Gigaset SE365 WLAN is
rebooting.

Off

The WLAN interface is not active.

During WPS registration:

On (300 s)

WPS registration was successful.

Flashing slowly

WPS registration is in progress.

Flashing quickly

WPS registration was not successful.

Flashing quickly
with interruption

More than one client tried to register.

Power

The Gigaset SE365 WLAN has been powered up.

Off

The Gigaset SE365 WLAN has been powered down.

Summary of Contents for Gigaset SE365 WLAN


































































































Search results

Summary of Contents for Gigaset SE365 WLAN

Reviews:

Related manuals for Gigaset SE365 WLAN

Brands by name

Popular brands

Siemens Gigaset SE365 WLAN, Operating Instructions Manual

Search results

Summary of Contents for Gigaset SE365 WLAN

Reviews:

Related manuals for Gigaset SE365 WLAN

Brands by name

Popular brands