28
Basic Setup Wizard
Gigaset SE365 WLAN / englisch / A31008-M1064-R101-1x-7619 / basic_config.fm / 19.09.2007
Sc
hablone 2
005_0
7_2
7
ì
If you want to use roaming, enter the same SSID as the one used by the access point
you select.
In Access point operating mode, enter the SSID that you wish to use for your wireless
network.
Make a note of this SSID, you also need to enter it into the network adaptors of the
PCs in your wireless network.
Repeater (WDS)
(only displayed in Repeater operating mode)
You can enter or choose an access point for which you wish to extend the range of the
wireless network. If a connection to the access point exists, the
Signal strength
, the
SSID
and the
Channel
are displayed. The WDS function must be activated on the access
point. To do this, please refer to your access point's user guide.
ì
Enter the
MAC address
of the access point or select an access point from the list of
available access points by clicking
Add
.
The MAC address of an access point in the Gigaset product range is shown on the
nameplate on the underside of the unit.
ì
Enter a name for the access point in the
Comment
field. This name will assist you to
identify the various devices more easily. The SSID is the default setting.
ì
Click
Refresh
to update the display.
ì
Click
Next >
.