Siemens Gigaset SE365 WLAN Operating Instructions Manual Download Page 58

Page: 58 / 97

Configuring the Advanced Settings

Gigaset SE365 WLAN / englisch / A31008-M1064-R101-1x-7619 / advanced_config.fm / 19.09.2007

hablone 2

005_0

7_2

WPA2 / WPA with authentication server (Access point operating mode only)

In large networks (e.g. in companies)

WPA2 / WPA

enables the use of an additional

authentication service. In this case, user access is controlled by user accounts and pass-
words in addition to WPA encryption. A RADIUS server acts as an authentication server.
If you use WPA2/WPA it is not possible to use WPS.

In the

Security

field, select the option

WPA2 / WPA

Enter the IP address of the RADIUS server in the

RADIUS server IP address

field.

Enter the port of the RADIUS server in the

RADIUS server port

field.

In the

RADIUS server secret key

field, enter a key conforming to the conventions of

the RADIUS server, which is to be used by the server for authentication.

Click

to apply the settings.

Summary of Contents for Gigaset SE365 WLAN


































































































Search results

Summary of Contents for Gigaset SE365 WLAN

Reviews:

Related manuals for Gigaset SE365 WLAN

Brands by name

Popular brands

Siemens Gigaset SE365 WLAN, Operating Instructions Manual

Search results

Summary of Contents for Gigaset SE365 WLAN

Reviews:

Related manuals for Gigaset SE365 WLAN

Brands by name

Popular brands