48
Configuring the Advanced Settings
Gigaset SE365 WLAN / englisch / A31008-M1064-R101-1x-7619 / advanced_config.fm / 19.09.2007
Sc
hablone 2
005_0
7_2
7
ì
In the
Default gateway
,
Preferred DNS server
and
Alternate DNS server
fields,
enter the data required for connecting to the Internet. As a rule, you can enter the
IP address of the router in your network for
Default gateway
and
Preferred DNS
server
, which sets up the connection to the Internet for all the PCs in the network.
Entries in the
Alternate DNS server
field are generally optional. For additional infor-
mation, please consult the appropriate chapter in the operating instructions for your
router.
ì
In the
Domain name
field, you can specify a domain name in the local network.
You can specify static IP addresses for individual PCs which are then assigned by the
DHCP server.
ì
Enter the
MAC address
of the PC and the required
IP address
in the relevant fields.
ì
Click
Add
.
ì
Click
OK
to apply the settings.
ì
You should restart all the devices once all the configuration settings have been
made.
Please note:
The address block you enter must not overlap with those of other DHCP servers
in your network or the static IP addresses of devices connected to your network. This
could otherwise cause IP addresses to conflict. This can impair or block the accessibil-
ity of some or all of the devices in your network.
Please note:
If you use the Gigaset SE365 WLAN in Access point operating mode and the integrated
DHCP server has been activated, configure the network settings for the connected PCs
so that the
Obtain an IP address automatically
option is activated. If you deactivate
the Gigaset SE365 WLAN's DHCP server, you will have to assign a static IP address for
the PCs via the network settings unless there is another DHCP server on the network.
For further information about this please consult the document "Configuring the local
network" on the CD.
Please note:
u
We recommend using only one DHCP server in the network. If you are already
using a DHCP server in your network, you should switch off the DCHP server on
your Gigaset SE365 WLAN.
u
Make sure that you adjust the IP configuration of your Gigaset SE365 WLAN as
well as that of the connected devices (PC, games console etc.) to the configuration
of the other participants in your network or of your communication partner, for
example a valid IP address (that differs from the addresses already assigned) and
the appropriate subnet mask.
