Siemens Gigaset SE365 WLAN Page 87 Operating Instructions Manual Download

Page: 87 / 97

Appendix

Gigaset SE365 WLAN / englisch / A31008-M1064-R101-1x-7619 / appendix.fm / 19.09.2007

hablone 2

005_0

7_2

You cannot estab-
lish a wireless con-
nection to the
Gigaset SE365
WLAN via WPS.
(Access point oper-
ating mode)

The registration but-
ton has not been
pressed on the
Gigaset SE365 WLAN.

Press the registration button on the
Gigaset SE365 WLAN back panel
and activate WPS within two min-
utes on the network adapter.

You defined a PIN for
WPS registration but
the network adapter
or repeater doesn’t
use any PIN or not the
right one.

Check the wireless network encryp-
tion settings and find out which PIN
is used by the Gigaset SE365 WLAN.
Enter this PIN on the network
adapter.

Access control via the
MAC address filter is
activated but the PC
is not included in the
MAC address list.

Enter the PC that wants to register
via WPS in the MAC address list.

After a WPS regis-
tration attempt,
the

WLAN

LED

keeps flashing and
the desired client is
not registered.

More than one client
has tried to register.

Check if maybe an external device
has registered with your network.

If yes:

Change the WPA PSK key manually
as soon as possible (see page 39)
and perform the WPS registration
via PIN (see page 52).

If no:

Try to register again after a short
time period.

Problem Possible

cause

Remedy

Summary of Contents for Gigaset SE365 WLAN


































































































Search results

Summary of Contents for Gigaset SE365 WLAN

Reviews:

Related manuals for Gigaset SE365 WLAN

Brands by name

Popular brands

Siemens Gigaset SE365 WLAN, Operating Instructions Manual

Search results

Summary of Contents for Gigaset SE365 WLAN

Reviews:

Related manuals for Gigaset SE365 WLAN

Brands by name

Popular brands