Siemens Gigaset S2 HiPath 4000 Operating Manual Download Page 33

Page: 33 / 109

Setting the handset

Step by Step

Changing the emergency number

Open the main menu of the handset.

[

Select the menu item and confirm.

[

Select the menu item and confirm.

[

Select the menu item and confirm.

Delete the old emergency number.

Enter the new emergency number.

Open the menu.

[

Select the menu item and confirm.

Activating/deactivating automatic call
answering

This function allows you to accept calls by removing the

handset from the charging shell.

Open the main menu of the handset.

[

Select the menu item and confirm.

[

Select the menu item and confirm.

[

Select the menu item and confirm.
Automatic answering is activated.

The activated function is ticked and can be deactivated

by selecting it once more.

Press the On-hook key to end the process.

H/Set Set-

tings

Handset

Add. Emerg. No

Save Entry

H/Set Set-

tings

Handset

Auto Answer

Summary of Contents for Gigaset S2 HiPath 4000














































































































Search results

Summary of Contents for Gigaset S2 HiPath 4000

Reviews:

Related manuals for Gigaset S2 HiPath 4000

Brands by name

Popular brands

Siemens Gigaset S2 HiPath 4000, Operating Manual

Search results

Summary of Contents for Gigaset S2 HiPath 4000

Reviews:

Related manuals for Gigaset S2 HiPath 4000

Brands by name

Popular brands