Siemens Gigaset S2 HiPath 4000 Operating Manual Download Page 27

Page: 27 / 109

Setting the handset

Step by Step

Setting the handset

You can change the standard settings of the handset if

you are not happy with them.

Setting the speaker volume

You can adjust the speaker volume during a call. The fol-

lowing volumes are adjustable:

• Volume in handset mode. Three volume levels are

possible.

• Volume in speakerphone mode. Five volume levels

are possible. You can only change the speakerphone

volume if the speakerphone is active (

page 32).

You are on a call.

either:

Open the menu for setting the volume. The volume

menu for either handset mode or speakerphone mode

is displayed.

or:

Open the menu if the upper side of the Control key is

programmed with another function, for example, when

toggling.

[

Select the menu item and confirm.

then:

Define the setting.

Press the display key if you want to permanently save

the setting.

Press the On-hook key to end the process.

Handset Volume

Save

Summary of Contents for Gigaset S2 HiPath 4000














































































































Search results

Summary of Contents for Gigaset S2 HiPath 4000

Reviews:

Related manuals for Gigaset S2 HiPath 4000

Brands by name

Popular brands

Siemens Gigaset S2 HiPath 4000, Operating Manual

Search results

Summary of Contents for Gigaset S2 HiPath 4000

Reviews:

Related manuals for Gigaset S2 HiPath 4000

Brands by name

Popular brands