Siemens Gigaset S2 HiPath 4000 Operating Manual Download Page 34

Page: 34 / 109

Step by Step

Setting the handset

Setting the date and time

The handset date and time are automatically set when

you set up a call to another station. If your communica-

tion system does not support this function, you can set

the date and time manually. The handset data and time

must be set so that calls receive the correct timestamp.

either:

Open the main menu of the handset.

[

Select the menu item and confirm.

[

Select the menu item and confirm.

or:

If the date and time have not yet been set:

Press the display key.

then:

Enter the date, for example, 22.09.2004 = 220904.

Move the cursor down one line.

Enter the time, for example, 19:05 = 1905.

Save the settings.

Press the On-hook key to end the process.

H/Set Set-

tings

Date/Time

Time

Save

Note:

If your communication system does not auto-

matically set the date and time, you must check

the setting from time to time and if necessary,

correct it.

Summary of Contents for Gigaset S2 HiPath 4000














































































































Search results

Summary of Contents for Gigaset S2 HiPath 4000

Reviews:

Related manuals for Gigaset S2 HiPath 4000

Brands by name

Popular brands

Siemens Gigaset S2 HiPath 4000, Operating Manual

Search results

Summary of Contents for Gigaset S2 HiPath 4000

Reviews:

Related manuals for Gigaset S2 HiPath 4000

Brands by name

Popular brands