Siemens Gigaset S2 HiPath 4000 Operating Manual Download Page 38

Page: 38 / 109

Step by Step

Setting the handset

Resetting the defaults

This function allows you to reset your mobile phone to

the defaults, for example, if you want to pass it on to

someone else or reset it.

The handset features are handled as follows:

Resetting

Open the main menu of the handset.

[

Select the menu item and confirm.

[

Select the menu item and confirm.

[

Select the menu item and confirm. A security check

question appears.
Confirm the security check question. The handset is

returned to the default.

Feature

Action

Sound settings

are reset

Call-by-call list

is retained

System registration

is retained

Telephone directory

is retained

Redial list

is deleted

H/Set Set-

tings

Handset

Reset Handset

Yes

Note:

For information about deleting the telephone

directory see

page 36.

Summary of Contents for Gigaset S2 HiPath 4000














































































































Search results

Summary of Contents for Gigaset S2 HiPath 4000

Reviews:

Related manuals for Gigaset S2 HiPath 4000

Brands by name

Popular brands

Siemens Gigaset S2 HiPath 4000, Operating Manual

Search results

Summary of Contents for Gigaset S2 HiPath 4000

Reviews:

Related manuals for Gigaset S2 HiPath 4000

Brands by name

Popular brands