Siemens Gigaset S2 HiPath 4000 Operating Manual Download Page 28

Page: 28 / 109

Step by Step

Setting the handset

Setting the ringer

Setting the ringer volume and melody

Tones and melodies are saved on your handset. You can

also download melodies from a computer (

page 92)

and manage them on the handset (

page 22). When

selecting the menu, the ringer sounds at the current

setting. You can choose between three ringer volumes,

as well as a crescendo ring (volume increases gradually)

and no ringer.

In order to better differentiate between your handset’s

ringing tones, select the following settings:

• Ext. Calls

• Internal Calls

• Appointments

• Alarm

• All

Open the main menu of the handset.

[

Select the menu item and confirm.

[

Select the menu item and confirm.

[

Select the menu item and confirm.

Set volume.

Move the cursor down one line.

Set the ringer melody (if configured by the system

administrator):

• for example, tones 1 to 3 for internal calls

• for example, melody 4 to 20 [+16 downloadable] for

external calls

Save

1 Ringer volume

2 Ringer melody

3 Announce the caller

name by playing

back the speech pat-

tern saved (not sup-

ported)

___Ext. Calls___

Announce On

Audio Set-

tings

Ringer Settings

Ext. Calls

...

Summary of Contents for Gigaset S2 HiPath 4000














































































































Search results

Summary of Contents for Gigaset S2 HiPath 4000

Reviews:

Related manuals for Gigaset S2 HiPath 4000

Brands by name

Popular brands

Siemens Gigaset S2 HiPath 4000, Operating Manual

Search results

Summary of Contents for Gigaset S2 HiPath 4000

Reviews:

Related manuals for Gigaset S2 HiPath 4000

Brands by name

Popular brands