Siemens Gigaset S2 HiPath 4000 Operating Manual Download Page 93

Page: 93 / 109

Telephone blocking

Step by Step

Locking the telephone line to prevent
misuse

You can prevent unauthorised persons from using your

telephone (and the system directory) during your

absence.

Prerequisite:

You have been assigned a personal iden-

tification number (PIN) by System Support.

Locking the telephone line to prevent unauthorised
dialling

Call the system menu.

> <

[

Select and confirm the basic service.

either:

6 7

Enter the service code.

or:

> <

[

Select the menu item and confirm.

> <

[

Select the menu item and confirm.

then:

Enter the PIN (code no.).

[

Press. If the PIN is correct, it will be confirmed with:

"carried out" on the display.

Enabling the telephone again:

Call the system menu.

> <

[

Select and confirm the basic service.

Note:

As an alternative, however, you can lock your

handset against misuse (

page 84).

Neither of these two locks may be active if you

want to place a call.

The PINs for locking the telephone line and for the

handset are not identical.

BASIC SERVICE

PIN / COS?

CHANGE COS

BASIC SERVICE

Summary of Contents for Gigaset S2 HiPath 4000














































































































Search results

Summary of Contents for Gigaset S2 HiPath 4000

Reviews:

Related manuals for Gigaset S2 HiPath 4000

Brands by name

Popular brands

Siemens Gigaset S2 HiPath 4000, Operating Manual

Search results

Summary of Contents for Gigaset S2 HiPath 4000

Reviews:

Related manuals for Gigaset S2 HiPath 4000

Brands by name

Popular brands