Siemens Gigaset S2 HiPath 4000 Operating Manual Download Page 51

Page: 51 / 109

Conducting calls – enhanced functions

Step by Step

Deleting an e-mail address

Open the phonebook.

[

Select the menu item and confirm.

Select the required entry.

Open the menu.

[

Select the menu item and confirm.

Changing an e-mail address

Open the phonebook.

[

Select the menu item and confirm.

Select the required entry.

Open the menu.

[

Select the menu item and confirm.

Enter changes.

Open the menu.

[

Save the entry.

Press the On-hook key to end the process.

Deleting the entire e-mail directory

Open the phonebook.

[

Select the menu item and confirm.

Select the required entry.

Open the menu.

[

Select the menu item and confirm.

Press the display key to confirm the deletion.

<E-MailDirectory>

Delete Entry

<E-MailDirectory>

Copy and Edit

Save Entry

<E-MailDirectory>

Delete List

Yes

Summary of Contents for Gigaset S2 HiPath 4000














































































































Search results

Summary of Contents for Gigaset S2 HiPath 4000

Reviews:

Siemens Gigaset S2 HiPath 4000, Operating Manual, Page: 51 / 109

Search results

Summary of Contents for Gigaset S2 HiPath 4000

Reviews: