Siemens FUG1010 IP65 NEMA 4X, Operating Instructions Manual, Page: 90 / 271

Commissioning
6.3 Installation Menus
FUG1010 IP65 NEMA 4X
Operating Instructions, 01/2013, A5E02951519-AC
89
Level A Level B Level C Level D (see
manual)
Level E Level F
Memory/Fault Set Fault/Memory
Memory Delay (s) N/A
Flow Total Units Flow Vol. Units Enter From List
Std Vol Corr No/Yes
Flow Time Units Enter From List
Flow Disp. Range Enter From List
Flow Disp. Scale Enter From List
Total Vol. Units Enter From List
Std Vol Corr No/Yes
Totalizer Scale Enter From List
Total Resolution Enter From List
Totalizer Mode Enter From List
Batch/Sample Tot Numeric Entry
Span/Set/Cal Span Data Enter From List
Set Alarm Levels Enter From List
Calib. Flowrate Intrinsic
Kc
MultiPoint
Calib. Table 1 Index Variable 1 Enter From List
Calib. Table 1 New Point
Table Active 1 No/Yes-
Clear Table 1 No/Yes
Calib. Table 2 Same as Table 1
Calib. Table 3 Same as Table 1
Display Setup Select Data Enter From List
Data Display Enter From List
Time Base Enter From List
StripChart Clear No/Yes
Logger Setup Logger Mode Enter From List
Logger Data Enter From List
Logger Interval Enter From List
Logger Events Enter From List
Display Logger Enter From List
I/O Data Control Analog Out Setup Enter From List
Relay Setup Relay 1,2,3,4
Analog Inp Setup Enter From List
Diagnostic Data Path Select 1,2, 1 & 2
Path Enable No/Yes
Flow Data Enter From List
Application Info Enter From List
Gas Data Enter From List