manualshive.com logo in svg

Siemens FUG1010 IP65 NEMA 4X, Operating Instructions Manual, Page: 140 / 271

Share
Download
Siemens FUG1010 IP65 NEMA 4X Operating Instructions Manual Download Page 140

 

Service and maintenance 

9

9.1

 

Maintenance 

The device is maintenance-free, however, a periodic inspection according pertinent 

directives and regulations must be carried out.   
An inspection can include check of: 
●

 

Ambient conditions 

●

 

Seal integrity of the process connections, cable entries, and cover screws 

●

 

Reliability of power supply, lightning protection, and grounds 

9.2

 

Technical support 

If you have any technical questions about the device described in these Operating 

Instructions and do not find the right answers, you can contact Customer Support:    
●

 

Via the Internet using the Support Request:  

 Support request (

http://www.siemens.com/automation/support-request

)  

●

 

Via Phone: 
–

 

Europe: +49 (0)911 895 7222 

–

 

America: +1 423 262 5710 / 1 800 333-7421 

–

 

Asia-Pacific: +86 10 6475 7575 

Further information about our technical support is available on the Internet at  

 Technical support (

http://support.automation.siemens.com/WW/view/en/16604318

)  

Service & Support on the Internet     

In addition to our documentation, we offer a comprehensive knowledge base online on the 

Internet at:  
Service and support (

http://www.siemens.com/automation/service&support

)  

There you will find: 
●

 

The latest product information, FAQs, downloads, tips and tricks. 

●

 

Our newsletter, providing you with the latest information about your products. 

●

 

Our bulletin board, where users and specialists share their knowledge worldwide. 

●

 

You can find your local contact partner for Industry Automation and Drives Technologies 

in our partner database. 

●

 

Information about field service, repairs, spare parts and lots more under "Services." 

FUG1010 IP65 NEMA 4X 
Operating Instructions, 01/2013, A5E02951519-AC 

139

 

Summary of Contents for FUG1010 IP65 NEMA 4X
















































































































































































































































































Reviews:

No comments