Siemens FUG1010 IP65 NEMA 4X, Operating Instructions Manual, Page: 56 / 271

Connecting
5.4 Programming the Transmitter
FUG1010 IP65 NEMA 4X
Operating Instructions, 01/2013, A5E02951519-AC
55
The table below indicates the viscosity, specific heat ratio and estimated sound velocity (Vs)
for some common gases. The default "Gas Parameters" are suitable for natural gas.
Table 5- 3 Common Gases for Clamp-On Measurement (at 14 BAR & 15.5°C / 200 PSIA & 60°F)
Gas Viscosity (cP) Spec. heat Ratio
(Cp/Cv)
Estimated Vs (m/s)
Carbon Monoxide 0.017 1.43 348
Ethane 0.010 1.32 281
Helium 0.019 1.66 1006
Hydrogen 1.410 1.41 1306
Methane 0.011 1.35 437
Natural Gas 0.011 1.33 400
Nitrogen 0.017 1.42 348
Oxygen 0.020 1.42 324
Standard Volume Compensation
If a direct standard volume output is required from the meter, then the entry of an AGA8
compensation table may be needed. Refer to the manual for further details on configuring
the meter for standard volume compensation.
Save/Rename Site procedure
Whenever new site configurations are added to an existing site that site must be saved again
to retain the new site changes.
1.
To save all programmed data to site, press <Left Arrow> and then scroll up to [Chan/Path
Setup].
2. Press <Right Arrow> and scroll to [Save/Rename Site].
6LHPHQV 'XDO3DWK>@ $%&
5LJKWDQGHQWHUWRVDYH6LWH6HWXS
&KDQ3DWK6HWXS
5HFDOO6LWH 1RVLWHV
&KDQQHO(QDEOH 1R
&UHDWH1DPH6LWH$%&
6LWH6HFXULW\ 2II
'HOHWH6LWH 1RVLWHV
6DYH5HQDPH6LWH
①
The saved site name now appears in the menu screen.
3. Press <Right Arrow> and then <ENTER> to save all programmed data to site.
4. To return to the top menu level, continue to press the <Left Arrow> key.