Siemens FUG1010 IP65 NEMA 4X, Operating Instructions Manual, Page: 106 / 271

Functions
7.3 Selecting Flow Units
FUG1010 IP65 NEMA 4X
Operating Instructions, 01/2013, A5E02951519-AC
105
4. Scroll down to the [Totalizer Mode] menu and press the <Right Arrow> to select the
Totalizer Mode option list.
)ORZ7RWDO8QLWV
6LHPHQV 'XDO3DWK>@3DWK
&KRRVHSRVLWYHQHJDWLYHRUQHWWRWDO
)ORZ9RO8QLWV &XELF)HHW
6WG9RO&RUU 1R
)ORZ7LPH8QLWV +5
)ORZ'LVS5DQJH $XWRUDQJH
)ORZ'LVS6FDOH .&8)7+5
7RWDO9RO8QLWV &XELF)HHW
7RWDOL]HU6FDOH .&8)7
7RWDO5HVROXWLRQ 1(*)/2:
7RWDOL]HU0RGH !1(7)/2:
%DWFK6DPSOH7RW 326)/2:
5. Press the <Up/Down Arrows> to select the desired mode.
6. Press <ENTER> to store selection.
Totalizer Mode Controls
From the RS-232 serial port all of the Totalizer commands listed below can be executed
using PC keyboard function keys via VT100 terminal key emulation.
Note
Si-Ware or HyperTerminal should be in the Data Display mode when invoking the function
keys referenced in the table below. Use the key sequence <Ctrl L> to display the Data
Display mode.
Communications Setup
Connect the flow meter to your PC. Refer to Appendix A for communications setup
procedures, if needed.
1.
Access Si-Ware or, if using a PC, access HyperTerminal from the PC [Programs] menu,
then select [HyperTerminal].
2. In [Connection Description] dialog box, enter a connection name (e.g. FUT1010). Click
[OK].
3. In [Phone Number] dialog box, select [Direct to COM 1 (or COM 2)]. Click [OK] to select.
4. In [Properties] dialog box, enter RS-232 parameters. Click [OK].
5. At terminal screen, click [File]. Select [Properties].
6. Select [Settings] tab. At [Emulation] box, select [VT-100].
7. Select [ASCII Setup]. In [ASCII Sending] uncheck boxes. In [ASCII Receiving] check
[Append line feeds to incoming line ends.]. Click [OK].