Siemens FUG1010 IP65 NEMA 4X, Operating Instructions Manual, Page: 182 / 271

Appendix
A.4 RS-232 Connection
FUG1010 IP65 NEMA 4X
Operating Instructions, 01/2013, A5E02951519-AC
181
8. Next, left-click on the [ASCII Setup] button (see screen above). In the [ASCII Sending]
dialog box, make sure that both [send line ends with line feeds] and [Echo Typed
characters locally] are UNCHECKED. In the [ASCII Receiving] dialog box, left-click to
place a check mark before the [Append line feeds to incoming line ends] dialog. When
your screen looks like the example below, left-click the [OK] button.
9. You are now ready to communicate with the 1010 flow meter. But first, save your settings
by moving the mouse cursor to [File], sliding the cursor to [Save], then clicking [OK] on
the Save dialog box.
10. The next time you want to use HyperTerminal:
● Click on Start.
● Drag to Programs.
● Drag to Accessories. Drag to HyperTerminal, and click.
● Double-click the icon you selected for the connection.
Note
For easier access, create a shortcut to the connect icon from your desktop. Right-click on
the icon to open its dialog box. Left-click on [Copy] or [Create a Short Cut] and then move
the mouse cursor to a blank area on your desktop. Right-click to open dialog box and
then left-click on [Paste] to place a shortcut to the connect icon on your desktop.
Accessing the Installation Menu
Once the parameters are set, HyperTerminal automatically initiates Command mode. You
will see a blank screen.
1.
Press <Enter> a few times until you see [? For Help] on the screen.
2. Type: ? (question mark) and then press <Enter> to see a list of the available commands.