Dark
Pulse not enabled
Pulse enabled
Drive status displays (D50)
Drive not enabled
Drive enabled
Alarm not cancelled
Alarm cancelled
No zero mark input
Zero mark input
IGBT under-temperature
IGBT over-temperature
Drive status displays (D51)
Dark
Alarm output off
Alarm output on
Drive not ready
Drive ready
Zero mark output on
Zero mark output off
Brake open
Brake closed
Power resistor off
Power resistor on
Display data format D10, D11 and D12
(Example)
The point is lit. This point stands for
the decimal number.
In this example, the value is “1804.1”
Display data format D80
(Example)
The point is lit. This point stands for
the decimal number.
In this example, the value means that
the firmware version number is “01.01”.
Display data format D82
(Example)
The point is lit. This point stands for
the decimal number.
In this example, the value means that
the parameter version number is “01.01”.
Figure 6-11 Special data displays (D10, D11, D12, D80, D82)
EN-28 SINAMICS V60 Controlled Power Module (CPM60.1) Getting Started
