P47 value (default)
Parameter Set Menu
Status
Parameter Set
Function
Data Display
M
M
M
M
M
ENTER
ENTER
ENTER
M
or
: save value to RAM and return
M
ENTER
: return without saving
Menu display change after Mode button is pressed:
The point will turn dark under the following circumstances:
- At next power-on;
- After the value has been saved to the memory using
“Save user parameter” function under “Function” main
menu item.
Point is lit
Point is lit
Increase value
Decrease value
Par. No. 47
Par. No. 99
Par. No. 01
Par. No. 05
Press or for several seconds,
the value can be increased or descreased faster.
“P01” will be displayed by default at first power-on only.
The last parameter you changed before power-off will be
displayed by default at next power-on.
To change parameter settings, change the default setting of P01
first.
Figure 6-3
"Parameter Set" menu
Note
All parameter settings made in Parameter Set mode will be saved to RAM only. At next drive
power-on, the settings made will be recovered to the setting prior to the last setting
automatically. To save the setting permanently, you should use "Save user parameter" menu
entry under "Function" main menu.
Detailed description of individual parameters can be found in Section 6.2 "Parameter list
(Page 44)".
SINAMICS V60 Controlled Power Module (CPM60.1) Getting Started EN-21
