vii
Document No.: COM-00-05-16 June 2006, Revised June 2014
Version: C.1
to Data Mode) “(if the serial interface is configured…” and added note
“Configuration changes are made with the WAG in Command
Mode…..”
Page 3-17, paragraph 3.20
•
Designated Log Entries matrix as Table 3-2, Log Entry Descriptions
Page 3-21, Table 3-2
•
For Classification Warning, Log Entry FLASH: ZMODEM transfer
aborted, changed the Description to read “Means that the user
either aborted…”
Page 3-25, Table 3-2
•
Added Classification Information for Log Entry “PST: Persistent
request…”, “PST: Persistent tunnel…” and “MM/YY
HH:MMSS:mmm: DNS…”
Page 3-25, paragraph 3.21
•
Change
CAUTION
statement to read, “MAKE SURE….THE
USER CANNOT RECOVER THE LOG AFTER IT HAS BEEN
CLEARED.”
Page 5-2, Figure 5-2. Send File Pop-up Window
•
Replaced image with one more accurate and appropriate for this
manual.
Page 5-2, Figure 5-3. Zmodem File Send Screen
•
Replaced image with one more accurate and appropriate for this
manual.
Page 5-4, Figure 5-4. Zmodem File Receive Screen
•
Replaced image with one more accurate and appropriate for this
manual.
Page 6-2, paragraph 6.3
•
Reformatted
CAUTION
statement to remove extra spacing in second
line.
C
June 2006
Updated title page and all page footers to indicate ‘C’ Version of
document.
Page xi to xiii,
•
Glossary updated with missing acronyms and terms.
Page 1-1
•
Moved acronym (SSR) to first occurrence and capitalized ‘radio.’
•
Deleted extra bullet and space.
•
Added bullet and the word “Bridges”.
Page 1-2
•
Added full name to acronym at first occurrence.
Page 1-3
•
Added full name to acronym at first occurrence (two places).
Page 1-4
•
Replaced Figure 1-2 with new artwork.
•
Deleted “is” in first line of the second paragraph.