iv
Document No.: COM-00-05-16 June 2006, Revised June 2014
Version: C.1
Page 2-7, paragraph 2.3, EQUIPMENT CONNECTION TO WAG
•
Added subparagraph 2.3.6, Office System Interface Configuration,
including Figure 2-7 to support text
Page 2-8, paragraph 2.4, CONFIGURATION USING TERMINAL
EMULATION SOFTWARE, Step 3
•
Added note “If the screen shown in figure 2-9…”
Page 2-9, paragraph 2.4, CONFIGURATION USING TERMINAL
EMULATION SOFTWARE, Step 4
•
Changed “…WAG…” to “…WAGs…”
Page 2-9, paragraph 2.4, CONFIGURATION USING TERMINAL
EMULATION SOFTWARE, first
NOTE
•
Changed last sentence in note to read, “Wait at least 3 seconds and
then type +++ and wait 3 seconds for the system to command
mode…”
Page 2-10, paragraph 2.5, CONFIGURATION USING TELNET
•
Changed “
To Login Using…
” to read, “
To log in using…
”
Page 2-12, paragraph 2.6, CONFIGURATION OF THE WAG UNIT,
subparagraph 2.6.1
•
Changed subparagraph title to read “Type 7 ATCS Address” and
reworded entire subparagraph, adding Figure 2-13, Type 7 ATCS
Address Configuration Screen with functional explanations
Page 2-13, subparagraph 2.6.2, Type 3 ATCS Address
•
Item 1: replaced Figure 2-14 ATCS Address Screen with one that
specifies the second line ATCS address item as, “Enter the NN…”
Page 2-13, paragraph 2.6.2, Type 3 ATCS Address, subparagraph 2.6.2
•
Changed subparagraph title to read “Type 3 ATCS Address” and
reworded entire subparagraph, adding Figure 2-14, Type 3 ATCS
Address Configuration Screen with functional explanations
Page 2-15, paragraph 2.6, CONFIGURATION OF THE WAG, subparagraph
2.6.4
•
Reformatted paragraph to “unwrap” Figure 2-16 from the text for
steps 1 through 4
Page 2-15, paragraph 2.6, CONFIGURATION OF THE WAG, subparagraph
2.6.5
•
Changed subparagraph title to read “WAG Test Mode” and reworded
entire subparagraph to read “This function is for future…..”. All
subparagraphs in this section renumbered accordingly.
Page 2-18, paragraph 2.6, CONFIGURATION OF THE WAG, subparagraph
2.6.8
•
Removed last sentence (“To specify the routing table never
expires…”) from step 2.
Page 2-23, paragraph 2.6, CONFIGURATION OF THE WAG, subparagraph
2.6.14