INSTALLATION AND CONFIGURATION
2-12
Document No.: COM-00-05-16 June 2006, Revised June 2014
Version: C.1
2.
Do the following:
a.
To keep any of the current displayed values, press
ENTER
.
b.
To enter a new value, type the first 3 digits of the new Type 7 ATCS address (RRR) and press
ENTER
.
c.
To enter a new value, type the second 3 digits of the new Type 7 ATCS address (LLL) and press
ENTER
.
d.
To enter a new value, type the third 3 digits of the new Type 7 ATCS address (GGG) and press
ENTER
.
e.
To enter a new value, type the fourth 2 digits of the new Type 7 ATCS address (SS) and press
ENTER
.
f.
To enter a new value, type the fifth 2 digits of the new Type 7 ATCS address (DD) and press
ENTER
.
When finished, the user will be returned to the First Configuration Menu. The new Type 7
ATCS address is displayed.
3.
Prior to exiting the First Configuration Menu, select “Save changes then restart” to save the
changes and restart the WAG.
2.6.2
Type 3 ATCS Address
The WAG can be assigned both Type 3 and Type 7 ATCS addresses. This enables the WAG to
handle any ATCS message of either type that it sees. See paragraph 2.6.1 for directions on
changing Type 7 addresses.
Changing the Type 3 ATCS address lets the user specify the Type 3 ATCS address for the WAG on
the network. The Type 3 address for each unit uses the field wayside equipment ATCS address
format 3.RRR.NN.DDDD. The address segments are as follows:
RRR
The railroad number.
NN
Node number.
DDDD Base device number.
To Assign Type 3 ATCS Address:
1.
On the First Configuration Menu, select “WAG Type 3 ATCS Address” to be changed. The Type
3 ATCS Address screen (see Figure 2-13) appears.
