manualshive.com logo in svg

Siemens 6GK5204-0BA00-2KB2, Operating Instructions Manual, Page: 73 / 176

Share
Download
Siemens 6GK5204-0BA00-2KB2 Operating Instructions Manual Download Page 73

7.2

Power supply

Connecting the power supply

The power supply is connected using a 3- or 4-pin plug-in terminal block. Usable cable cross-
section 0.25 to 2.5 mm

2

. Permitted tightening torque 0.57 - 0.79 Nm (5 - 7 in.lb.).

The power supply is non-floating. The signal cables of the Ethernet TP ports are floating.

Note

Removing or inserting the power supply with the power on is not permitted.

Coding
With the SCALANCE X204RNA EEC the supplied plugs and the socket on the device for the power 
supply match in their coding.

The plug and socket for the signaling contact are coded differently from the connection of the 
power supply. The plugs for power supply and signaling contact cannot therefore be 
interchanged.

You can use non-coded plugs in coded sockets and coded plugs in non-coded sockets.

Pin assignment

Pin number

Pin assignment of the SCALANCE X204RNA (PRP 
and HSR)

Pin assignment of the SCALANCE X204RNA EEC 
(PRP and HSR and PRP/HSR)

 

Pin 1

L1   +24 VDC

PE
Coding of the socket

Pin 2

M1

L1    +24 V … +250 VDC
L1    100 V … 240 VAC
Coding of the plug

Pin 3

M2

N1
Coding of the socket

Pin 4

L2   +24 VDC

-

Note

Since the SCALANCE X204RNA EEC does not have a redundant power supply, connect the power 
supply between L1 and N1.

Connecting up

7.2 Power supply

SCALANCE X-200RNA
Operating Instructions, 04/2022, C79000-G8976-C342-07

73

Summary of Contents for 6GK5204-0BA00-2KB2

















































































































































































Reviews:

No comments