Siemens 6GK5204-0BA00-2KB2 Operating Instructions Manual Download Page 39 | Manualshive

Page: 39 / 176

Siemens 6GK5204-0BA00-2KB2 Operating Instructions Manual Download Page 39

5.5

SCALANCE X204RNA EEC product properties

5.5.1

SCALANCE X204RNA EEC (PRP)

Possible attachments

The SCALANCE X204RNA EEC (PRP) has four RJ-45 jacks and two slots for SFP modules. The SFP
modules can be used as an alternative to the two RJ-45 jacks PRP A and PRP B and are intended
for the connection of the LAN A and LAN B networks. End devices or network segments without
PRP capability are connected to the RJ-45 jacks P1 and P2.

Figure 5-4

SCALANCE X204RNA EEC (PRP)

5.5.2

SCALANCE X204RNA EEC (PRP/HSR)

Possible attachments

The SCALANCE X204RNA EEC (PRP/HSR) has four RJ-45 jacks and two slots for SFP modules. The
SFP modules can be used as alternatives to the two RJ-45 jacks A/H1 and B/H2 and are intended
to connect networks LAN A and LAN B or to connect to the "High-availability Seamless
Redundancy Protocol" ring.

Device description

5.5 SCALANCE X204RNA EEC product properties

SCALANCE X-200RNA
Operating Instructions, 04/2022, C79000-G8976-C342-07

39

«
...
37
38
39
40
41
...
»

Summary of Contents for 6GK5204-0BA00-2KB2

















































































































































































Reviews:

No comments