manualshive.com logo in svg

Siemens 6GK5204-0BA00-2KB2, Operating Instructions Manual, Page: 11 / 176

Share
Download
Siemens 6GK5204-0BA00-2KB2 Operating Instructions Manual Download Page 11

Decommissioning

Shut down the device properly to prevent unauthorized persons from accessing confidential 
data in the device memory.

To do this, restore the factory settings on the device.

Also restore the factory settings on the storage medium.

Recycling and disposal

The products are low in pollutants, can be recycled and meet the requirements of the WEEE 
directive 2012/19/EU for the disposal of electrical and electronic equipment.

Do not dispose of the products at public disposal sites.

For environmentally friendly recycling and the disposal of your old device contact a certified 
disposal company for electronic scrap or your Siemens contact (Product return (

https://

support.industry.siemens.com/cs/ww/en/view/109479891

)).

Note the different national regulations.

License conditions

Note
Open source software

Read the license conditions for open source software carefully before using the product.

You will find license conditions in the following documents on the supplied data medium:

• DOC_OSS-SCALANCE-X_74.pdf

• DC_LicenseSummaryScalanceX200RNA_76.pdf

You will find these documents on the product DVD in the following directory: /Open Source 
Information

Trademarks

The following and possibly other names not identified by the registered trademark sign 

®

 are 

registered trademarks of Siemens AG:

SCALANCE, C-PLUG, OLM

Introduction

1.1 Security information

SCALANCE X-200RNA
Operating Instructions, 04/2022, C79000-G8976-C342-07

11

Summary of Contents for 6GK5204-0BA00-2KB2

















































































































































































Reviews:

No comments