manualshive.com logo in svg

Siemens 6GK5204-0BA00-2KB2, Operating Instructions Manual, Page: 139 / 176

Share
Download
Siemens 6GK5204-0BA00-2KB2 Operating Instructions Manual Download Page 139

9.10.5

LLDP Configuration

In the "LLDP Configuration" dialog box, you enable/disable the forwarding of received LLDP 
frames for the device.

Figure 9-41

Supervision Frames

If the option is enabled, the device forwards LLDP frames like standard multicast frames.

If the option is disabled, the device discards all received LLDP frames.

9.10.6

The "Statistics" Menu

Counting and evaluation of received frames

A SCALANCE X-204RNA has internal statistics counters with which it counts the number of 
received frames for each port according to the following criteria:   

• Frame length

• Message frame type

• Bad frames

This information provides you with an overview of the data traffic and any problems on the 
network.

Functional description and configuration using Web Based Management

9.10 The "Switch" menu

SCALANCE X-200RNA
Operating Instructions, 04/2022, C79000-G8976-C342-07

139

Summary of Contents for 6GK5204-0BA00-2KB2

















































































































































































Reviews:

No comments