IV352 Rev.02
Date Issue:
2012-10-27
Page 152 di 232 + FR
Appendix VII: Customized Setting for CEI 0-21
In the event the user needs to customize the parameter setting for CEI 0-21, please following the steps
below,
1. Press
"
or
!
to scroll the menu till the CEI 0-21 setting is shown on the LCD.
2. Press
႒
for 5 seconds to enter “Grid Parameter” menu.
3. Press
"
or
!
to select between “Default” or “Customization”. Select “Customization” to start the
customized setting procedure. (If “Default” is selected, “INIT OK” will be shown on the LCD.)
4. In “Grid HV Level 1” menu, press
"
or
!
to change the value, and then press
႒
for 5 seconds to
confirm the setting and move the next parameter.
5. Repeat the procedure in step 4 till all parameters are set. Please refer to the flow chart below.
6. “INIT OK” will be shown on the LCD and the setting is completed.
