manualshive.com logo in svg

SICK UE 440, Operating Instructions Manual, Page: 13 / 102

Share
Download
SICK UE 440 Operating Instructions Manual Download Page 13

Operating Instructions

Chapter 

3

UE 440/470

8 010 432/P097/14-03-05

© SICK AG • Industrial Safety Systems • Germany • All rights reserved

13

Product description

3.2

 

Operating principle of the device

3.2.1

 

Principle of the device

The safety controller UE 440/470 enables easy integration of several safety and standard
sensors or input devices, other input devices or actuators in a safety application. With this,
you can...

$

 

implement individual safety applications.

$

 

implement two independent safety applications.

$

 

implement two safety applications bound to one another.

Within a safety application, the safety controller processes specific signals of optical and
tactile sensors.
The safety controller also expands the functions of connected systems, such as C 4000 or
S 3000 (PSDI mode, simultaneous protective field monitoring).

Using the Configuration & Diagnostics Software (CDS), you can link the connected
components to one another. Predefined software function modules used to implement
your safety application are available in the CDS for this purpose.

Fig. 1:  Principle of the device

Opto-electronic protective devices, such

as S 3000 or C 4000

Tactile or opto-electrical

sensors

Hazardous area or hazardous point

protection

PSDI applications

UE 440/470

Input devices, operating

mode selector switches,

signal lamps

Access protection

or

or

Summary of Contents for UE 440







































































































Reviews:

No comments