Figure 48: Monitoring plane
1
Parameters for the monitoring plane
2
Parameters for the safety laser scanner
7.7.1
Parameters for the monitoring plane
Overview
Configure a name, the protection task, object resolution, and multiple sampling setting
for the monitoring plane.
At first, the object resolution and multiple sampling configured for the monitoring plane
apply for all fields. If necessary, make changes to each individually at a later date. If you
do this, Safety Designer will indicate this in the settings for the monitoring plane.
Name of the monitoring plane
You can use the name to identify monitoring planes when creating fields and monitor‐
ing cases and also in reports.
b
Enter a descriptive name for the monitoring plane (e.g., “Hazardous area on the
right hand side”).
✓
The name is used to identify the monitoring planes.
Protection task
•
Hazardous area protection (horizontal)
Typically, for a horizontal approach, the requirement is to detect the leg. The typical
object resolution is leg (70 mm).
CONFIGURATION
7
8023152/160F/2019-11-14 | SICK
O P E R A T I N G I N S T R U C T I O N S | outdoorScan3 Core I/O
77
Subject to change without notice