NOTE
The default save location is normally the download folder (this depends on the individ‐
ual browser settings).
7.3.9.6
Loading the configuration
When this function is activated, a previously stored OD5000 configuration file must be
selected from the computer being used. This is then uploaded to the device and all set‐
tings are adopted accordingly.
7.3.10
Communication
Figure 50: Overview of the Communication tab
Settings which affect communication received from or sent to the device can be made
in this view. The following settings are available here:
7.3.10.1
Communication settings
Input settings
This is where the MF access is assigned a function.
The possible selection includes:
•
External Input: The MF access is used for the selected switching function,
ting the switching function", page 46
.
•
AOD1: The OD5000 can be connected with an AOD1 evaluation unit via its pins
RS485+/RS485- (
see "Pin assignment of the connections", page 24
).
NOTE
Only one channel (A) can be used when AOD1 is selected.
AOD1 Baud rate
This is where the speed of communication with the AOD1 is set. The device automati‐
cally establishes a connection with the AOD1 by default and the settings are defined
autonomously.
7
OPERATION
48
O P E R A T I N G I N S T R U C T I O N S | OD5000
8021391//2017-10-06 | SICK
Subject to change without notice
