The left-hand navigation screen can be viewed as standard but can be hidden by click‐
ing on the upper right-hand buttons with three bars.
Two buttons can be seen on each bar at the top:
Measured values:
Displays the current measured values. The display of the measured
value can be adapted using two buttons.
Help:
Displays help texts on the current settings.
7.3.4
Monitoring
Figure 30: Overview of the Monitoring tab
The measured value plotter displays the current measured values (distance/thickness).
Current measured values can be hidden or displayed at any time using the
Measured val‐
ues
button in the bar at the top of the screen. The color corresponds to the respective
channel.
The display of the individual channels can be activated and deactivated using buttons
A
to
D
.
The digital plotter displays the statuses of the output signals for channels A to D.
The status of the outputs is displayed by LEDs to the left of the buttons:
•
Red = output active
•
Grey = output inactive
The speed at which the measured values and the digital plotter are output is adjusted
equally by sliding the controller on the speed bar.
7.3.5
Measurement
Measurement settings can be made in the
Measurement
tab.
OPERATION
7
8021391//2017-10-06 | SICK
O P E R A T I N G I N S T R U C T I O N S | OD5000
31
Subject to change without notice
