background image

Table 21: Compatibility

Label on the device

Label on the system plug

Compatible

Yes

Only compatible with Rev ≥ 1.1.0

Information is available
from your SICK subsidiary.

Rev 1.1.0 (or higher)

Yes

Rev 1.1.0 (or higher)

Only compatible with Rev ≥ 1.1.0

Yes

13.3

Data sheet

13.3.1

microScan3 Core I/O AIDA

Features

Table 22: Features

 

microScan3 Core I/O AIDA

Protective field range

Devices with a max. protec‐
tive field r
ange of 4.0 m

≤ 4.0 m, details:

 

see "Sensing range", page 133

Devices with a max. protec‐
tive field r
ange of 5.5 m

≤ 5.5 m, details:

 

see "Sensing range", page 133

Devices with a max. protec‐
tive field r
ange of 9.0 m

≤ 9.0 m, details:

 

see "Sensing range", page 133

Scanning range of the refer‐
ence contour field

Same as protective field range,

 

see "Sensing range", page 133

Scanning range of the con‐
tour detection field

Same as protective field range,

 

see "Sensing range", page 133

Distance measurement range

Devices with a max. protec‐
tive field r
ange of 4.0 m

≤ 40 m

Devices with a max. protec‐
tive field r
ange of 5.5 m

≤ 40 m

Devices with a max. protec‐
tive field r
ange of 9.0 m

≤ 64 m

Fields

≤ 4

Simultaneously monitored
fields

≤ 4

Field sets

≤ 4

Monitoring cases

1

Scanning angle

275° (–47.5° … 227.5°)

Protective field resolution

30 mm, 40 mm, 50 mm, 60 mm, 70 mm, 150 mm, 200 mm 

1)

Angular resolution

Devices with a max. protective field range of 4.0 m

Scan cycle time 30 ms 0.51°

Scan cycle time 40 ms 0.39°

Devices with a max. protective field range of 5.5 m

Scan cycle time 30 ms 0.51°

Scan cycle time 40 ms 0.39°

Devices with a max. protective field range of 9.0 m

13 

TECHNICAL DATA

126

O P E R A T I N G   I N S T R U C T I O N S | microScan3 Core I/O AIDA

8017784/1ELL/2022-01-21 | SICK

Subject to change without notice

Summary of Contents for microScan3 Core I/O AIDA

























































































































































Reviews: