SICK microScan3 Core I/O AIDA, Operating Instructions Manual, Page: 81 / 152

Draw rectangle
Draw circle
Draw circle segment
Mask areas ( see "Drawing in points that cannot be monitored",
page 86 ). Use the drawing functions for fields to draw the masked
areas. The buttons are crosshatched.
Enable propose field
Edit a field using coordinates (
see "Editing fields using coordinates",
page 85 )
Push the object into the foreground or background
Select field design
Calculate field
Zoom in
Zoom out
Zoom to area
Zoom to work space
Show snapshot of the spatial contour. Clicking again clears the spatial
contour shown.
Show live spatial contour
Paste background image ( see "Background image", page 84 )
Open field editor settings
Field display
Safety Designer displays the field types in different colors.
Table 9: Colors of the field types
Protective field Reference contour field and contour detection
field
Red Turquoise
Create fields and field sets
NOTE
You can only create the number of fields and field sets allowed in the performance
package of the safety laser scanner. If the maximum number of fields and field sets has
already been used, it is not possible to create any more fields or field sets.
Create the fields in a field set in the same order that you need them in the monitoring
case table (
see "Cut-off paths", page 93 ).
Table 10: Buttons for field sets
Add field set
CONFIGURATION
7
8017784/1ELL/2022-01-21 | SICK O P E R A T I N G I N S T R U C T I O N S | microScan3 Core I/O AIDA 81
Subject to change without notice