7.10
Inputs and outputs, local
Overview
Figure 57: Inputs and outputs, local
1
Overview: Plug connectors of the safety laser scanner
2
Pin assignment
3
Further settings for some signals
Assign the required signals to the safety laser scanner connection in the
Inputs and
outputs, local
dialog box.
Connection overview
Safety Designer shows the plug connector of the safety laser scanner.
Pin assignment
Safety Designer displays the plug connector with its individual pins.
Assigning signals to the pins
Safety Designer shows the available signals on the right under
Signals
.
b
Drag the signal towards the pins.
✓
Possible pins for the connection are highlighted.
b
Drop the signal on the pin.
✓
The signal name is shown on the right next to the pins.
7
CONFIGURATION
90
O P E R A T I N G I N S T R U C T I O N S | microScan3 Core I/O AIDA
8017784/1ELL/2022-01-21 | SICK
Subject to change without notice