SICK microScan3 Core I/O AIDA, Operating Instructions Manual, Page: 103 / 152

8 Commissioning
8.1 Safety
WARNING
Hazard due to lack of effectiveness of the protective device
b
Before commissioning the machine, make sure that the machine is first checked
and released by qualified safety personnel.
b
Only operate the machine with a perfectly functioning protective device.
DANGER
Dangerous state of the machine
During commissioning, the machine or the protective device may not yet behave as you
have planned.
b
Make sure that there is no-one in the hazardous area during commissioning.
DANGER
Hazard due to lack of effectiveness of the protective device
When changes are made to the machine, the effectiveness of the protective device may
be affected unintentionally.
b
After every change to the machine and changes to the integration or operational
and secondary conditions of the safety laser scanner, check the protective device
for effectiveness and recommission as specified in this chapter.
Before initial commissioning, project planning, mounting, electrical installation and
configuration must be completed in accordance with the following chapters:
• "Project planning", page 20
• "Mounting", page 56
• "Electrical installation", page 59
• "Configuration", page 63
8.2 Alignment
The following options are available to you for precisely aligning the safety laser scanner
using mounting kit 2:
COMMISSIONING
8
8017784/1ELL/2022-01-21 | SICK O P E R A T I N G I N S T R U C T I O N S | microScan3 Core I/O AIDA 103
Subject to change without notice