Figure 70: Opening MainRoutine
The first block to be inserted is an input that is to trigger the “Read temperature”
process.
Figure 71: Inserting ExamineOn module
2.
From the
Favorites
tab, select the
ExamineOn
block and insert it into the
MainRoutine
.
The corresponding variable must be assigned to this input, in our example variable
TEMP_Trigger.
Figure 72: Assignment of variable TEMP_Trigger to ExamineOn
3.
Click on the
question mark
.
✓
A drop-down menu will open.
4.
Select variable TEMP_Trigger.
For the edge sensitivity of the process flow, the ONS block must be inserted.
CONFIGURATION USING A PLC
5
8014213/1EF3/2021-12-08 | SICK
O P E R A T I N G I N S T R U C T I O N S | AFS/AFM60 EtherNet/IP
77
Subject to change without notice