manualshive.com logo in svg

SICK EtherNet/IP AFM60, Operating Instructions Manual, Page: 49 / 113

Share
Download
SICK EtherNet/IP AFM60 Operating Instructions Manual Download Page 49

Figure 24: IP address assigned successfully

5.2.3

Freezing the assigned IP address

1.

Switch off encoder (supply voltage off).

2.

Set value “000” via the three address switches.

3.

Switch on encoder (supply voltage on).

Deactivating DHCP server

4.

Click on the encoder address line in the lower window area to activate the 

Disable

BOOTP/DHCP

 button.

5.

Click the 

Disable BOOTP/DHCP

 button to deactivate the encoder’s DHCP server.

Figure 25: 

Disable BOOTP/DHCP

 button

6.

If the button does not respond to this request, the 

Disable BOOTP/DHCP

 option can

alternatively be activated via the 

Disable BootP/DHCP

 menu option under 

Tools

.

CONFIGURATION USING A PLC 

5

8014213/1EF3/2021-12-08 | SICK

O P E R A T I N G   I N S T R U C T I O N S | AFS/AFM60 EtherNet/IP

49

Subject to change without notice

Summary of Contents for EtherNet/IP AFM60


















































































































Reviews:

No comments