5.4.2
Setting up communication
1.
Right-click the
Ethernet
symbol and select the
New Module...
command.
Figure 31: Integrating encoder using EDS
✓
The
Select Module Type
dialog opens.
2.
Select the respective encoder type in the
Catalog
tab.
Figure 32: Select module
Depending on the connected type, the following designation is displayed:
°
AFS60A-Eth/IP
for the AFS60 EtherNet/IP
°
AFM60A-Eth/IP
for the AFM60 EtherNet/IP
3.
Click
OK
.
✓
The
Module Properties [Modulname]
dialog opens.
CONFIGURATION USING A PLC
5
8014213/1EF3/2021-12-08 | SICK
O P E R A T I N G I N S T R U C T I O N S | AFS/AFM60 EtherNet/IP
53
Subject to change without notice
