Technical information
Chapter
5
EFI
8012622/Z098/2016-11-07
© SICK AG • Industrial Safety Systems • Germany • All rights reserved
51
Subject to change without notice
Configuration options via EFI
5.2.2
EFI gateway with safety controller and ESPE connected
If a safety controller with an ESPE is integrated via an EFI gateway, then you can configure
the EFI gateway (2) and the ESPE (3) via the safety controller (1).
It is only possible to configure the EFI gateway via the EFI gateway (2). Although the safety
controller (1) and the ESPE (3) are visible in the CDS, they cannot be configured and
diagnostics are not possible.
Fig. 33: Configuration of an
EFI gateway via a safety
controller with ESPE
Fig. 34: Configuration of an
EFI gateway via the EFI
gateway