![background image](http://html.mh-extra.com/html/sick/dl1000/dl1000_operating-instructions-manual_1263895036.webp)
initialization position.
3.7.5
Ethernet interface
The Ethernet interface enables setting of the device parameters as well as monitoring
and control of the device. If desired, measurement data (e.g. distance, speed or signal
level values) and operating data (e.g. inside temperature, operating hours or device
status) are transmitted.
No continuous data output is possible via the Ethernet interface.
Additional information and a description of communication with the CoLa-A SICK proto‐
col (ASCII values) used with the device can be found in the “Dx1000 Telegram Listing”
(English, no. 8021820) technical information publication available at
3.8
Display and operating elements
1
PWR
In1/Q1
QA/Q2
BF
LNK
SER
2
3
SF
Figure 7: Display and operating elements
1
Touch display
2
LEDs
3
LED Status indicator
LEDs/LED Status indicator
LED
Description
LED PWR
and LED Sta‐
tus indicator
■
LED off: no operation, no supply voltage connected
■
Green LED: interference-free operation
■
Orange LED flashing: warning (device status via SOPAS ET or device status
double word,
)
■
Red LED flashing: error (device status via SOPAS ET or device status double
word,
LED In1/Q1
■
LED off: digital output or digital input deactivated
■
Orange LED: digital output or digital input active
LED QA/Q2
■
LED off: digital output deactivated or analog output signal above or below the
valid current levels (4 mA … 20 mA)
■
Orange LED: digital output active or analog output signal within the valid
current levels
3
PRODUCT DESCRIPTION
36
O P E R A T I N G I N S T R U C T I O N S | DT1000 PROFIBUS DP and DL1000 PROFIBUS DP
8024560/1A19/2021-06-30 | SICK
Subject to change without notice