![background image](http://html.mh-extra.com/html/sick/dl1000/dl1000_operating-instructions-manual_1263895072.webp)
Parameter
Factory setting
Switching point:
-4500 m to 4500 m
10 m
8.3.2
Defining the switching hysteresis for the distance value
NOTE
The procedure for configuring the Q1 and Q2 digital outputs is identical. The configura‐
tion is illustrated on switching output Q1.
Unwanted switching can be prevented by entering a hysteresis if the determined
distance value fluctuates around the set switching points (
).
Parameter
Factory setting
Hysteresis:
0 m to 1500 m
0.1 m
8.3.3
Defining the switching point active state for the distance value
NOTE
The procedure for configuring the Q1 and Q2 digital outputs is identical. The configura‐
tion is illustrated on switching output Q1.
The active state describes the relationship between the switching state (active or
inactive) and the voltage present on the digital output (high or low) (
).
Parameter
Factory setting
LOW:
Output potential for active switching state: low voltage
Output potential for inactive switching state: high voltage
LOW
HIGH:
Output potential for active switching state: high voltage
Output potential for inactive switching state: low voltage
8
REFERENCE
72
O P E R A T I N G I N S T R U C T I O N S | DT1000 PROFIBUS DP and DL1000 PROFIBUS DP
8024560/1A19/2021-06-30 | SICK
Subject to change without notice